Design your own custom multi-opening mat collage board
Create your very own custom multi-opening mat. When you are finished designing your mat below, hit 'Add to cart' to save your item. Please double-check your openings, measurements, and sizes before you buy. You can easily add a second mat layer to your collage board. Our designer shows the exact opening sizes for both the top mat and bottom mat layers. This makes it easy to see your exact spacing and borders as you design.
For the best experience, please use a desktop browser with the multi-opening mat designer.
Edit mat opening #1
*All units are inches.
*If you have a second mat layer enabled, left/right/top/bottom reflect distance from the outside of BOTH mat layer openings to the edge.
Generate a multi-opening collage mat
Turn the switch to 'on' to enable the auto-layout designer controls. The auto-layout controls allow you to automatically and instantly generate a uniform mat board.
*WARNING generating a new multi-opening collage mat will override any existing changes or designs you have made to your mat. After generating your design, you may still individually edit mat openings by clicking on the opening you wish to edit.
Multi-Opening Mat Designer FAQ
What are the minimum margins for multi-opening mat designs?
To keep your mat structurally sound, each opening must be at least 1 3/8" from the outside edges of the mat and at least 1/2" away from any neighboring opening.
Can I still create custom opening sizes and layouts?
Yes. You can freely set each opening's size and position, and also use the auto-layout controls to generate a uniform grid that you can continue editing.
Do these minimum spacing rules apply to both manual and auto-layout modes?
Yes. Whether you place openings manually or generate them with auto-layout, minimum spacing from the mat edges and between openings still applies.